With only a few simple materials and a little time and effort, you can construct your own shadow box frame to showcase your prized possessions or artwork. Find out how big your display item should be before going on to the next stage. Plywood for the back and a larger piece that can be cut to suit the frame are both good options. The frame’s sides may be held in place using wood glue and nails. Simply stick the front of a picture frame to a piece of glass and you’re done. After that, you may repaint your prized possession!
Cut and sand the wood.
Decide how big you want your featured image to be. It is necessary that the shadow box frame be big enough to accommodate anything placed within. To make a shadow box frame, measure the object’s length and breadth using a ruler or tape measure. For lightbox templates, please visit our website.
Back it up with a sheet of plywood that is at least 14 inches (36 mm) thick.
A piece of plywood as near as possible to your specifications should be obtained. Purchase a bigger piece of plywood and cut it to your desired dimensions afterwards. If necessary, plywood may be sized. Draw the shadow box frame proportions onto the backing sheet of plywood using a ruler and a thin piece of plywood as a background. Using a circular saw, cut plywood in accordance with the lines you’ve drawn on the material.
You’ll need plywood that is 8 feet (2.4 metres) long and 1 by 4-inch thick.
Plywood may be easily transformed into a shadow box frame if it is cut to the suitable measurements. In order to have a sturdy structure, you’ll want to start with a sheet of plywood that’s thicker than the other four sides and the bottom.
Use a 1 by 4 board to cut out the top and bottom halves.
A 1 by 4 in (2.5 by 10.2 cm) plywood board may be used to trace the plywood backer’s dimensions onto the plywood board. The top and bottom portions of the frame’s board will be cut using a circular saw.
Remove any burrs using 180-grit sandpaper.
Splinters and rough places may be removed by sanding the whole piece. To ensure that the boards are uniform in size and shape, inspect the cut edges and sides of each one carefully.
Visit for more articles: allcitynews.net
