Most people who start to paint on paper prefer simple graphical sketches, which can then be restored and paint or crayons. Gradually the complexity of the image increases. This effect is achieved by increasing the load gradually. This is how we proceed with this article. We’ll tell you how to draw a warship.
Table of Contents
DRAW A SIMPLE SHIP IN COUNTRY-STYLE
Draw a ship – it’s not so easy as it might seem at first glance. Therefore, it should start from a simple sketch. For this purpose, we chose the old model of swimming means, such as a pirate ship. To draw them, get a clean landscape blanket, a pencil, and an eraser.
Further conventionally divide your sheet in half and the bottom half of the mid-vertical draw strip measuring approximately 1.5-2 cm. Set the pencil over the line and away from the swipe another small question (1 cm) on the right side.
Then, before we how to draw a warship, set the pencil under the first straight line and draw a line using a slight rounding up. A similar curve, remove the top (both cables are parallel to each other). Then connect the two lines, you get an unusual figure.
DRAWING THE SECOND PART OF THE SHIP
In the next stage, picture a similar shape, but smaller, next to a past. It will be a unique ship layout with a line of outline figures and a small V-shaped neck at the joint line. On closer inspection, you will see a ready-made stern shape on the nose and the lower part of the future vessel.
The next step is prorisovyvanie further curve below a prominent figure. This should be done how to draw a warship visually gradually and to finish the stern line (make it smoother and straighter).
DRAW A NOSE AND A MAST ON A SHIP
Now let’s see what we get a ship. For greater realism, we recommend it finish with its bow angled line (the high tower on the nose) and three cross-shaped squiggles (this is a mast skeleton).
WE BUILD FROM THE BEGINNING OF THE SHIP: IT IS EASY TO DRAW THE SAIL
Back to the bow of the ship and its pointed. Take a pencil and draw under the sail, which resembles a small elongated rectangle. Then proceed to the first mast, the top of his back down about 0.5-1 cm. Draw first one and then the other strip, which is parallel to each other. Between the two, draw the front and back of a small curved half-arch. Repeat it all from the bottom and on the adjacent mast. As a result, two masts with four sails should be obtained. The third mast stands at the ship’s stern. Instead of the rectangular, draw a triangular sail.
DRAW A GUN AND SMALL PARTS ON THE SHIP
Earlier, old military or pirate ships were made of wood. To add realism to our boat, we carry out around the perimeter of the stern horizontal stripes. But do not neglect to move room for windows and guns. What do you need? In the middle of the ship, draw five round windows that will remain neat gun, ready to fight the most severe thought and win.
Next, before you how to draw a warship in total, add a few strokes. This will be the top of the mast, which, as a rule, will be located guard and patrol frigate flags.
It is also worth separating the outer parts of the vessels from the inside. To do this, a small ledge in front and add a few compartments of the ship. Our aqueous ready transportation. It persists just to paint it in colors proper for old wooden frigates.
HOW EASY IS IT TO DRAW THE PENCIL CARRIER?
If you’re wondering how to paint on USS-type aircraft carriers, we’ll show you how to do it. Thus, in the first stage, again limit the album’s top and bottom leaves and outline its middle.
Further, draw the fork angle at the bottom of the plane (its direction will indicate the right hand if you turn his hand away, bend three fingers in a fist, and the thumb and fingers are planted in the party). From endpoints angle view to the lines of another, but larger, a forked angle. It should look something like a slightly elongated diamond.
DRAW THE BASIC DETAILS OF THE SHIP
The next stage in our guide, “How to draw a ship” (for beginners), is 3d drawing the main parts of the ship. In the middle of a pencil, and conditionally divide our “diamond” into two triangles. With a smaller size, draw another forked angle, slide along the two lines up from it, and then connect them rounded elevation. Swipe where the radar equipment is installed instead of the sails.
Let’s go back to the original fork angle. Take away from him towards the little line from them – another down and then another – and down the side. Total received four lines of different lengths, forming the stern of the ship. Further, the left side of the large rhombus draws a small ledge.
DORISOVYVAT AFT AND ON THE DECK OF AN AIRCRAFT CARRIER
The next step is painting the story of an aircraft warship and its aerials in different shapes and sizes. To do this, it is best to take the original photo of the ship and try to show it on the paper deck. Next, draw a diamond on this vertical line and share the most aft of the ship into two halves.
On one side, draw bumpers, windows, and, of course, runway markings. And the last stage paints the ship and sea or ocean, where he will plow in search of military exploits and adventure.
Summary – choosing between the two options, you can learn how to draw a warship in more detail.
Visit for more articles